This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
SPECIFICATIONS
21 in
Length:
7.25 in
Beam:
Flat Bottom
Hull Type:
FEATURES
The WaterBard a Pond Flyers™ RC Airboat is well suited for model airplane and boat enthusiasts alike! Simply put you will not find a more entertaining, easy building, and thoughtfully designed power boat on the market. Our clean, reliable, and quiet electric power system shames the fuel power boats in both speed and operability. Quick building, durable balsa and plywood construction, matched to a solid power system equals lasting thrills at the local watering hole. Round up your posse and go Waterboarding today!
Product Includes:
Laser Engineered Precision Cut Balsa and Hardwood components.
Hardware, including Control Horns, and Control Linkage
Laser Cut Neoprene Gaskets
Photo-illustrated assembly manual.
Electronics Required:
Radio with at least 2 Channel Control
Micro Receiver
1 HS-55* Servo or HS-82MG
2200KV (2216-6) Brushless Outrunner
30A Brushless ESC
7x3.5x3 Propeller**
7.4V 2100mAh LiPo
Suggested Building Supplies:
Hobby Knife with #11 Blades
Sanding Block
Sanding Bar
220, 400, and 800 Grit Sand Paper
Balsa Filler
5 and 30 Min. Epoxy
Medium and Thick CA glue
For a quick, easy, and lasting finish***:
Deft Brand - Clear Wood Finish
Lacquer Spray Paint - (Design Master Color Tool sprays)
*When using HS-55 (non metal gear) servos a Dubro servo saver (DUB120) is recommended
**This propeller is not suitable for use with an 11.1V battery and 2200KV SA Sport motor.
***Alternatively, you may seal the model with nitrate dope, lacquer, or acrylic and cover with Lightex (AeroKote Lite)