Huge Wing Area
Over 2000 sq. in. (130 sq. dm.) with a light 23-pound (10.4 kg) flying weight, comparable to flying a 120cc aerobatic model at nearly two-thirds the weight.
Champion Design
Designed by F3A and 3D World Champion, Quique Somenzini, ensuring superior performance.
Massive Control Surfaces
Large deflections for maximum maneuverability.
Easy Transport
Removable tail, including vertical fin, for compact vehicle transport.
Electric-Ready
Compatible with most 65cc or similar electric motors without modification.
Carbon Fiber Landing Gear
Painted carbon fiber landing gear included for durability.
Accessible Components
Large canopy hatch for easy internal access.
Lightweight Cockpit
Foam cockpit floor and instrument panel included.
Complete Hardware
Turnbuckle-style pushrods, ball links, and turnbuckle wrench included.
Engine Compatibility
Accepts 60-70cc gas engines or equivalent electric motors, like the Desert Aircraft DA-70 or Potenza 65cc Brushless Motor.
Removable Wings
For easy transport and storage.
Factory Trim
Factory-applied trim scheme for a professional finish.
The RV-8 70cc FLS (FeatherLite Series) is a 35% scale model of the famous experimental Van’s Aircraft RV-8. Designer and World Champion Quique Somenzini has taken a completely new approach with the design of the RV-8 70cc FLS. A massive airframe, with over 2000 square inches (130 sq. dm.) of wing area, that comes in at 23 pounds (10.4 kg) flying weight, offers such an incredibly lightly loaded airframe, it feels like you are flying something lighter than air. Couple the extremely light wing loading with key design and geometric details from the master himself, and you get an aircraft that has a incredible flight envelope.
Along with the incredible airframe design of the RV-8 70cc FLS, it is also designed to accept multiple power systems, including 60cc electric setups that allow you to fly anywhere from 5 to 8 minutes on a typical 12S Li-Po setup! We also can’t forget about its float-ready airframe either! The optional RV-8 70cc FLS Float Set includes everything needed to get it on the water, and is also available to match your RV-8 70cc FLS’ colorscheme.
This is an airplane that you need to truly experience for yourself, and once you have, you’ll quickly add one to your hangar! From its insane stability at walking speeds with the flaps down, to classic 3D and precision aerobatic maneuvers, the RV-8 70cc FLS has the flight performance and versatility that is for every pilot, of virtually every skill level.
ARF FEATURES:
Huge wing area (over 2000 sq. in. or 130 sq. dm.) with a scant 23 pound (10.4 kg) flying weight. Thats like flying a 120cc aerobatic model at nearly two-thirds the weight!
Designed by F3A and 3D World Champion, Quique Somenzini
Massive control surfaces with large deflections for the utmost in maneuverabililty
Removable tail, including the vertical fin, allows the easy transport of the RV-8 70cc FLS in more compact vehicles
Electric-ready airframe allows most 65cc or similar electric motors to be installed without modification
Painted Carbon fiber landing gear included
Large canopy hatch for easy access to internal components
Float-Ready airframe allows for easy installation of the optional RV-8 70cc FLS Float set
Lightweight foam cockpit floor and instrument panel are included
Pre-cut baffles for the DA-70 are included
2 vastly different colorschemes are sure to fit personalities of all types
Turnbuckle-style pushrods, ball links and turnbuckle wrench included
Accepts gas engines from 60-70cc, or equivalent electric motors, like the Desert Aircraft DA-70, or the Potenza 65cc Brushless Motor
Airframe easily accepts 2 to 1 canister installs
Easily removable wings for transport and storage
Factory-applied trim scheme
ARFSV FEATURES:
All ARF Features, plus:
Factory-installed Potenza DS49010BLHV servos for ailerons, flaps, and elevators
Potenza DS49010BLHV servo included for rudder (not installed so you can choose your mounting location!)
(7) Potenza, 2-inch, Clamping, Aluminum Servo Arms included for flight control surfaces
Factory-installed servo extensions for ailerons, flaps, and elevators. Rudder servo extension included.
Factory-hinged control surfaces
Factory-sealed main wing and horizontal tail hinge gaps
Factory-installed aileron, flap and elevator control horns
Factory-assembled aileron, flap and elevator linkages that are ready for final servo centering and hookup
