GM3 FPV Gimbal + Avatar Pro Kit (Dual Ant)

Preface About GM1/GM2/GM3

Based on pilots feedback and implement head tracking function of goggles, our R & D department team has designed gimbals specifically for FPV cameras. This series includes three models: single-axis, dual-axis, and tri-axis, catering to various user needs. The design of the gimbal is primarily aimed at enhancing the pilot's experience, providing them with stable, smooth images, allowing them to easily capture stunning aerial videos and photos. With the addition of the head tracking function, it creates an immersive feeling.

Features:

• Enhanced FPV Experience
• Head Tracking Functionality
• Exceptional Stability
• Quick Assembly
• Compatibility
• Flexibility

GM1/GM2/GM3 compatibility with walksnail VTX:
The gimbal can't be used with V1 VTX, Mini 1s, Nano V3 and GT VTX, but can only be used with V2 VTX, V2 VTX Dual and Moonlight VTX.

Specifications:

• Model GM3
• Camera Compatibility 19mm FPV Camera
• Image Stabilization ±0.005°
• Max Controllable Speed ±1500°/s
• Max Controlled Rotational Range Pitch: ±120, Roll: ±60, Yaw: ±160°
• Size 50x46.5x53mm
• Weight 46g
• Control Mode PWM /UART
• Head Tracking Control Support
• Voltage 7~26V
• Static Power Dissipation 1.5W

Packing List:

• GM1/GM2/GM3 X1
• Power Cable X1

Walksnail Avatar HD Pro kit (Dual Antennas Version)

Features:

• Dual Antennas
• Compatible 4K
• FOV160°
• 6V-25.2V
• 4km range
• 22ms low latency
• Built-in 32G storage
• High frame starlight
• 1080P 120fps compatibility
• Sony Starvis II Technology

Bullet Points for Avatar HD Pro kit (Dual Antennas):

• The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency. Support 1080P/60FPS, 720P/120FPS.
• Featuring a 1/1.8 inch Sony Starvis II sensor, this camera delivers excellent night vision that's just as clear as day.
• The camera supports Gyroflow, take you smooth and stable video quality.
• The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
• Updated the design of PCB board and shell, improved the quality of VTX, more durable.
• Optimized the installation place of the antenna, so as to better protect the VTX.
• The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
• A spare pad is added to provide two power connection modes.
• New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.
• The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.
• It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.
• Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.

Specifications:

• Camera
  • Model: Avatar HD Pro Camera
  • Image Sensor: 1/1.8-Inch Sony Starvis II Sensor
  • Resolution: 1080P/60fps;720P/120fps,720P/60fps;1080P/120fps compatibility;
  • Ratio: 16/9; 4/3
  • Lens: 8Mp
  • FOV: 160°
  • Aperture: F1.6
  • Shutter: Rolling shutter
  • Min.Illumination: 0.00001Lux
  • Weight: 9.5g
  • Dimensions: 19x19x24mm
  • Coaxial Cable: 140mm
• VTX
  • Model Avatar V2 Pro Module(Dual Antenna)
  • Communication Frequency 5.725-5.850GHz
  • Transmitter Power (EIRP) FCC:<30dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm
  • 1/O Interface JST1.0*4(Power in)JST0.8*6(USB)
  • Mounting Holes 25.5*25.5mm; 20*20mm
  • Dimensions 33.5*33.5*10.5mm
  • Storage 32G
  • Recording 1080p/720p
  • Weight 15.4g
  • Operating Temperature -20-40?
  • Channels 8
  • Wide Power Input 6V-25.2V
  • Supported FC System Betaflight; Inav; Fettec; ArduPilot;Kiss
  • OSD Canvas mode
  • Latency Average delay 22ms
  • Antenna 2(IPEX)
• Avatar V2 Antenna
  • Polarization LHCP
  • Frequency range 5600MHz-6000MHz
  • Gain 1.9dBi
  • VSWR ≤1.5
  • Input Impedance 50Ω
  • Interface IPEX-1
  • Size R15 X 45mm(without cable)
  • Weight 2g

Packing List:

• USB cable X1
• 4 Pin silicone cable X1
• M2*4mm screws X8
• M2*5mm screws X4
• M2*6mm screws X4
• M2*14mm screws X4
• M2*5*0.5mm gasket X4