Mamba Micro Pro/26mm 6800kV

Make it Mamba Micro Pro. Castle invented 1/18th scale brushless, and now we are raising the bar.

Speed controls are only as good as their components. Castle uses only the latest and best. These aren’t always the least expensive. We can tell the difference and we are sure you will too.FETS are the little black things that are the heart and soul of all ESCs. FETS have gotten better, just like memory chips and digital cameras. FET capacities are going up, so should ESC performance. That’s the story behind Mamba Micro Pro. Thousands of drivers around the world have enjoyed the Mamba-25, now you can have more amp capacity just because the FETS have improved.

Why stop there?

When you design and build your own products, you don’t have to settle for tired compromises. We took the better components and made them work together in a better manner to lower resistance – resistance results in heat, heat limits controllers’ power. We’ve designed the circuit boards in a new manner to reduce resistance and we’ve added a new highly efficient heat sink to help the controller keep it’s cool.

OK, so what does this mean to me?

Mamba Micro Pro can handle more power for longer periods. Run larger motors in your cars, run larger cars with the same controller. Run in tall grass with no worries of thermal.

Programming Options

Just like the original Mamba-25, the following Mamba Micro Pro settings can be changed with the transmitter:

* Low battery voltage cut-off warning

* Brake strength

* Lockout reverse mode

* Timing adjustment

* Start-up mode

* Reverse speed

* Throttle response curve

* Brake response curve

* Saved profile setup files

* Punch control

* Separate brake strength

* Separate reverse power

Check out these high quality 26mm motors! We build test samples for various projects; some go into production and some won’t. These are high performance 2 pole motors that perform incredibly well -- they are simply too hard to make in quantity. Here’s a great chance to get some top notch gear for your larger 1/18th scale applications.

The 26mm motors were designed with the heavier 1/18th scale vehicles in mind. These include vehicles like the Duratrax Vendetta, Vendetta ST, Mini-Quake, and Losi Mini LST.

Specific Model Fit Notes

Associated RC18 Series 1. Not a drop in fit, but only very minor mods are required to make it fit...... only the holes in the motor mount need to be slightly enlarged (i did this with a hobby knife) 2. Limited gearing choices due to motor diameter, 15 tooth fits and is the minimum size that will bolt up without modifications

Losi Mini-T 1. Motor will not fit at all without major modifications...... motor diameter is simply too large to fit in tranny hole......

Losi Mini-LST 1. Bolts up without modification 2. Gearing choices extremely limited, as far as i can see, only a 15th tooth pinion will fit, no others fit without modification to truck

X-Ray M18 Series 1. Bolts up without modification 2. gearing choices slightly limited due to motor size