The Meteor65 Pro is equipped with 35mm propellers, enhancing power and providing a more versatile flying experience. In addition, it shares nearly identical components and features with the Meteor65. These include the F4 1S 5A FC (2022) with a built-in serial ExpressLRS 2.4G, Frsky, or TBS RX version, a powerful 350mW M03 VTX, efficient 19500KV 0802SE motors, and a C03 FPV camera. The drone's performance is meticulously balanced across all aspects.
Meteor65 Pro Frame & 35mm Propeller
Meteor65 Pro frame has the same perfect performance as the popular Meteor65 frame. The lightest lower profile 65mm frame to fit 35mm propellers. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
BETAFPV Meteor Series
Meteor65 Pro 2022 version is upgraded with a new micro canopy, which reduces the influence of heat on electronics. Supports serial ExpressLRS 2.4G instead of SPI ERLS 2.4G. And the new C03 FPV camera ensures a high-quality and clear image.
Flight Controller & ESC
The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor65 Pro. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP and can be switched to Futaba SFHSS protocol through Betaflight configurator. The ESC on the new board powered by BB51 hardware in place of BB21 comes with Bluejay 96k ESC firmware, allowing 0802SE 19500KV motors to give full play to the efficiency of power. We updated the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.
C03 Camera
C03 FPV Micro Camera is 1.45g ultralight weight and a great camera for indoor micro FPV quadcopters. It features a 1200TVL definition with 1/3" CMOS sensor, 2.1mm lens for 160° FOV, and excellent latency, which boasts high-quality, clear and sharper images through your goggles.
Package
1 Meteor65 Pro Brushless Whoop Quadcopter (1S)
2 300mAh 1S 30C Battery with BT2.0 connector
1 BT2.0 Battery Charger and Voltage Tester
1 TypeC USB cable
1 Customized Carry Case
1 Spare 35mm 3-blade props (1.0mm Shaft)
1 Screwdriver
3 Decorative Parts
1 20° Lens Camera Mount for C03 Camera
1 30° Lens Camera Mount for C02 Camera
1 Pack of Screws
