Meteor65, a leading 1S whoop WINTER TIME drone. It's equipped with the BT2.0 connector, lightest F4 1S Flight Controller and 0802SE 19500KV brushless motors. Strong and powerful dynamics, you’ll immediately notice how fantastic this lightweight 22.84g racer is at takeoff. It feels amazing as you hover around indoors, then let it rip around the house!
Meteor65 is the first generation whoop drone powered by a brand-new BT2.0 1S battery. The BT2.0 connector offers decreased connector resistance for much better discharge performance compared with the standard PH2.0 connector used by other manufacturers. The pre-soldered the BT2.0 cable, which can provide a more stable and powerful 9A continuous current and 15A burst to the flight controller. For minimizing weight and optimal performance, the Meteor65 uses the lightest combination of a F4 AIO Flight Controller and C01 camera. By using the latest 0802SE 19500kV brushless outrunner motors and 31mm 3-blade props you will have a completely different experience of powerful indoor flight.
Meteor65 lower profile frame is reduced 0.75g to 3.08g only. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
What's more, the Meteor65 is abundant with accessories, two 1S LiPo batteries w/BT2.0 connectors, a BT2.0 charger & tester, an extra set of props, screwdriver and a portable bag. It is easy to use and at a reasonable price! Also, the camera angle has been adjusted to 30°, which brings you greater flying experience!
Meteor65 1S Brushless Whoop
Weight: 22.84g (without battery)
FC/ESC: F4 1S AIO FC
Frame: Meteor65 65mm 1S Brushless Frame
Motors: 0802 19500kV Motors
Props: 31mm 3-blade props (1.0mm Shaft)
Camera: C01 Camera
VTX: Integrated 25mW VTX
Canopy: Canopy for Micro Camera
Receiver Option: FrSky
Battery: BT2.0 300mAh 1S Battery
Flight time: 0802SE 19500KV motor version: 3:30min-4min
Flight Controller
F4 1S AIO FC(SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3.92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad!
C01 Camera
C01 Camera is the lightweight camera customized for the weight-sensitive micro whoop drones, perfectly fits the Meteor65. Adapted a 1/4'' CMOS sensor, 2.1mm lens for 800TVL resolution and excellent latency while minimizing the weight to 1.4g. Packed with the micro canopy, protect your camera well in a hard crash.
Motors
0802SE 19500KV Motor is a lightweight 1S motor compared with the old 0802 motor. Not only a significantly reduced weight of 1.83g each but also ensures awesome performance of power and thrust. Lead wire soldered to the PCB, which allows you to repair it easier once it disconnected.
Frame
A lighter, lower profile 65mm frame is reduced 0.75g to 3.14g only. The battery slot is closer to the center of gravity for a
smoother flying experience and you will land on the motor screws instead of the battery. There are more options for colorful frames such as Beta-blue, mint-green, sakura-pink, mango-orange
Includes
1 * Meteor65 Brushless Whoop Quadcopter (1S)
2 * 300mAh 1S 30C Battery with BT2.0 connector
1 * BT2.0 Battery Charger and Voltage Tester
1 * Customized Carry Case
1 * Spare Set of 31mm 3-blade props (1.0mm Shaft)
1 * Screwdriver
Binding instructions: Power up the machine with a battery first. Press and hold the button for 3 seconds. Enter binding mode on your radio (FRSKYX D16 mode).
Tech Note: this product uses a built in SPI type receiver and will NOT bind to newer FrSky ACCESS transmitters or those running the latest ACCST 2.0 firmware. It can ONLY bind to FrSky branded transmitters running ACCST 1.0 firmware. It will also bind to Jumper/Radiomaster transmitters capable of transmitting in D16/D8 modes.
Meteor65 CLI Diff
Firmware Target betaflight_4.1.1_MATEKF411RX.hex
