RC8T3.1 Nitro Truggy Team Kit
Discontinued
|
click to enlarge
|
But only from... ASSOCIATED
All items from... ASSOCIATED
|
|
- New 4-shoe clutch provides precise power transfer and is easy to maintain. Optional spring rates and clutch bells allow custom tuning for varying grip levels
- V3 differentials with H.T.C. (High Torque Capacity) internal gears offer increased fluid capacity and more consistent feel lap after lap
- 133mm CVA driveshafts increase traction and chassis support
- Suspension arms have been updated to race specs
- Strengthened front upper suspension arm for improved durability
- Updated gearbox reduces differential movement for a more consistent gear mesh
- All suspension arm pivots have been revised for more ground clearance, resulting in better jumping and landing while also improving durability
- 16mm Big Bore 6061 aluminum shock bodies with bleeder-style caps
- 20mm I.D. shock springs for optimal spring rates
- +2mm steering block arms included for a smooth and precise steering feel
- Highly efficient drivetrain utilizes straight-cut bevel gears to provide great acceleration and run time
- Improved servo saver assembly
- Hard-anodized 7075 aluminum chassis with keyed lower suspension plates
- Pro-LineĀ® "Predator" body included
- Enclosed receiver box
- Full Factory Team rubber-sealed ball bearings
- Easily accessible front and rear differentials
- High parts compatibility with RC8B3.1e, RC8B3.1, and RC8T3.1e models, offering the perfect solution for multi-class racers
The RC8T3.1 has been overhauled with the latest upgrades from Team Associated! Many of the same winning features of the B3.1 have been integrated into this latest generation of the Team Associated T3 platform. The updates make the truck easier to drive, more consistent lap after lap, and are sure to make the new T3.1 a winner under any conditions.
The Area 51 engineers refined the suspension framework while also increasing durability and consistency on the track. An expansive line of option parts allows the RC8T3.1 to be tuned for specific driver demands and varying conditions.
Note: This vehicle comes as a kit and must be fully assembled by the user. Electronics and an engine are required. Final length, width and weight will vary with the actual electronics and tires used to complete the kit.
Needed to Complete
.21-.28 class rear exhaust engine
Exhaust system: muffler and header joining pack, or muffler spring
2-channel radio/transmitter/receiver set with switch - FM/PCM/2.4GHz recommended
Transmitter batteries
4.8-7.4v receiver battery pack: 1) flat style NiMH battery; 2) either 1600mAh LiPo or 2100mAh
LiPo or 1700 LiFe battery recommended
Model car fuel (30% nitro recommended)
Fuel bottle
Glow igniter
Starter box
1:8 scale truggy tires
1:8 scale truggy wheels
CA (cyanoacrylate) glue
Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
Thread-locking compound
Needle-nose pliers
Hobby knife
Reamer or hole punch for making holes in body
Ride height gauge
Steering servo: Reedy RT2207A recommended
Throttle servo: Reedy RS1806A recommended
What's in the box?
(1) RC8T3.1 Team Kit
(1) Manual