MT-4 S-Version 2.4Ghz Tx/Rx 4Ch

This is an Airtronics MT-4S Super 2.4GHz FH4T 4-Channel Telemetry-Capable** Radio System w/RX-472 Super Response Receiver & Sanwa Synchronized Link. The MT-4S Super builds on the original MT-4 by adding Sanwa Synchronized Link support, decreased response time (same as the M12), a new backlit LCD, RX-472 Super Response receiver and updated steering wheel and graphics.

Features:

• 4-Channel 2.4GHz FH4T Digital High-Response Telemetry System with Advanced Programming
• Backlit LCD Screen for Easy Viewing of Programming and Telemetry in All Types of Conditions
• High-Power FH4T Technology Provides the Best Reception and Connectivity
• 4-Cell Dry Battery Holder Also Accepts Optional NiCd/NiMH or 2S LiPo/LiFe Battery Packs
• Includes RX-472 2.4GHz FH4T Super Response Receiver w/Sanwa Synchronized Link Support
• 18-Model Memory
• Telemetry Logging
• Channel-Set Menu
• Servo Reversing
• Steering, Throttle and Brake Dual Rate
• End-Point Adjustment
• Exponential and ARC Adjustment
• Servo-Speed Adjustment
• Anti-Lock Braking
• Throttle Offset
• Lap and Interval Timers
• Total, Best and Individual Lap Display
• Four-Wheel Steering Mixing
• Dual Throttle Mixing w/Dig & Burn
• Normal, SSR and SHR Servo Modes
• Center or Parallel Trim Types
• CODE Auxiliary
• Step and Point Auxiliary
• Auxiliary Mixing
• Programmable Fail-Safe
• Receiver Battery Voltage Fail-Safe
• Digital Trims
• Servo Sub-Trim
• Programmable Switches, Lever and Dial
• Adjustable Steering Wheel and Throttle Trigger
• Adjustable Grip
• Variable-Rate Adjustment
• Model Naming, Model Select and Model Clear
• Direct Model Select
• Selectable Modulation Type
• Adjustable LCD Contrast and On-Time
• Adjustable Key-Volume and Tone
• Programmable Low-Voltage Alarm, Inactivity Alarm and Over-Voltage Alarm
• Digital Battery Voltage Monitor
• MT-4S Transmitter Specifications:
• Output Power: 100mW
• Nominal Input Voltage: 4.8 to 7.4v
• Operating Voltage Range: 4.0 to 9.6v
• Dry Weight: 13.68oz (388g)
• Frequency: 2.4GHz FHSS
• Modulation Type: FH2, FH3, FH3F, FH4T, FH4FT
• RX-472 Receiver Specifications:
• Nominal Input Voltage: 3.7 to 7.4v
• Weight: 0.23oz (6.6g)
• Dimensions: 1.18 x 0.91 x 0.55in (30.0 x 23.3 x 14.0mm)
• Frequency: 2.4GHz FH3/FH4T Selectable Via Transmitter
• Fail Safe Support: Yes (All Channels)
• Battery Voltage Fail-Safe Limit: 3.5-5.0v (FH3) / 3.5-7.4v (FH4T)
• What's Included:
• MT-4S Digital High-Response Telemetry Transmitter
• RX-472 Super Response Receiver w/SSL Support
• On/Off Switch
• Dry-Cell Receiver Battery Holder
• Wrist Strap Mount
• Optional Large Grip
• Optional Throttle Trigger-Angle Brackets
• Receiver Dust Boot Covers
• Items Required, But Not Included:
• 4 'AA' Alkaline or NiCd/NiMH cells or 2S LiPo or 2S LiFe Battery Pack for Transmitter

Servos and/or ESC - Airtonic's recommends using digital servos and ESCs that support a high frame-rate whenever possible. Due to the extremely high frame-rate of the MT-4S transmitter and RX-472 Super Response receiver, analog servos and many ESCs may not be compatible when used in SHR or SSR servo operating mode. To prevent compatibility issues, use analog servos only in NOR servo operating mode. If your ESC does not work in SHR servo operating mode, use NOR servo operating mode. Any brand and type of digital servo can be used in NOR or SHR servo operating mode. Only Airtronics/Sanwa SRG series digital servos are compatible for use with SSR servo operating mode.

**Telemetry Capable Airtronics receiver required (RX-461 or RX-462) for full Telemetry capability.